ARCHITECT SPECIFICATION

  • Plaster Mesh

    Arpitha Plaster Mesh

    Providing and fixing of Arpitha Plaster mesh made out of galvanized iron of nominal thickness 0.35 mm with a Zinc coating of 120 gms per Sqm at the junctions of Masonry and concrete works 150 mm Width, chasing Works 200 mm Width, Diagonal Fixing at Doors & Windows Opening to a width of 300 mm x 600 mm including tying in position with suitable nails / screws etc., complete and as per manufacturer specification, from M/s. ARPITHA EXPORTS, Bangalore. Rate shall include for preparation of surface, cleaning, curing etc. complete, all as directed by the architect / Engineers.

    I.100 mm wide(For masonry joints) Unit :: RMT
    ii.150 mm wide(For masonry offset joints) Unit :: RMT
    iii.200 mm wide(For chasing works plastering) Unit :: RMT
    iv.300 mm wide ( For doors and window openings) Unit:: RMT

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha Corner Bead

    Providing and fixing Arpitha Corner Bead made out of galvanized iron of nominal thickness 0.50mm with a Zinc coating of 120 gms per Sqm as protector for plastered wall and column corners/edges from chipping , including tying in position by using suitable nails / clamps / screws etc. complete and as per manufacturer specification from M/s. Arpitha Exports, Bangalore. Rate shall include for preparation of surface, cleaning, curing etc. complete, all as directed by the architects /engineers.

     

    Unit :: RMT

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha Plaster Stop Bead

    Providing and fixing Galvanized Arpitha Plaster Stop Bead of wing size 55 to 60mm plaster depth 10 to 19mm made out of galvanized iron of nominal thickness 0.50mm with a Zinc coating of 120 gms per Sqm as protector for plastered wall and door frames or windows, at the junction of plaster end and other materials, including tying in position by using suitable nails / clamps / screws etc. complete and as per manufacturer specification from M/s. Arpitha Exports, Bangalore. Rate shall include for preparation of surface, cleaning, curing etc. complete, all as directed by the architects / engineers.

    I. 10 mm Unit :: RMT
    ii.13 mm Unit :: RMT
    iii.16 mm Unit :: RMT
    iv.19 mm Unit:: RMT

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha POP Corner Bead

    Providing and fixing Galvanized Arpitha POP Corner Bead of size 25 x 25 mm wide and length 2.5 mts for pop plastering on gypsum board made out of galvanized iron of nominal thickness 0.45 mm with a Zinc coating of 120 gms per Sqm as protector for plastered corners/edges from chipping , including tying in position by using suitable nails / clamps / screws etc. complete and as per manufacturer specification from M/s. Arpitha Exports, Bangalore. Rate shall include for preparation of surface, cleaning, curing etc. complete, all as directed by the architects /engineers.

    Unit :: RMT

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha Steel Lintel

    Providing and fixing in position suitable size Arpitha Steel Lintel made out of 3mm thick CR steel sheet,perforated and powder coated for 60 to 80 mm microns thickness to prevent corrosion as per the specification from Arpitha Exports, Bangalore as approved by the Architect / Engineer, for all door and window opening etc . Rate Shall also include the covering with Arpitha 6 inches wide GI plaster mesh all around the juntions of Lintel and Wall. The minimum Load Carrying Capacity of Lintel should be 600 Kgs (For 100mm wall ) and 880 kgs( for 150 mm wall) and 1150 Kgs ( for 200mm Wall)

    Lintel sizes
    a. 100 mm wide Unit :: RMT
    b. 100 mm wide Unit :: RMT
    c. 100 mm wide Unit :: RMT

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha Steel Lintel Brackets

    Providing and fixing in place suitable size Arpitha Steel Lintel Brackets of 3 mm thick 'L' shape of the size 100 mm height and 150 mm in length, perforated and powder coated for 60 to 80 mm microns thickness to prevent corrosion at locations were one side is a column and the other side is a wall. Fixing with suitable Anchor bolts

    sizes
    a. 100 mm wide
    b. 100 mm wide
    c. 100 mm wide

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha PVC Cover Blocks

    Fabrication of reinforcements MILD STEEL confirming to IS 432 and/or high yield strength deformed TOR STEEL bars confirming to Yst 415 N/sq.mm of various diameters for reinforced concrete work. The work includes cutting bending, fabricating and placing in position according to drawings including supply and use of 16 Gauge black annealed binding wire in two strand to tie the bars in position and providing Arpitha PVC Cover Blocks as per IS 456 – 2000, for main reinforcements to ensure specified cover according to relevant drawings.For Concrete work – PVC Cover Block make M/s.Arpitha Exports (Equivalent) Bangalore

    I.Slab cover 1 Nos. one number for every 600 mm of concrete all around CB 1/CB 2
    ii.Beam Bottom & side one number for every 600 mm all round 25 mm CB 2 iii.One number for every 600 mm all around CB 3 iv.Column cover one number for every 600 mm all around 40 mm cover CB 4 v.Footing 1 No. for every 600 mm all around 50mm cover CB 5 vi.One number for every 600 mm all around CB 6

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha Tile Spacer

    Collecting and laying the first quality glazed Ceramic tiles of approved colour and of any Tile size set With Suitable Good Quality Tile Spacer (2, 3, 4,5,8,10 mm) all as directed by the architects / engineers.and make M/s.Arpitha Exports, Bangalore

    Available in
    2 mm
    3 mm
    4 mm
    5 mm
    8 mm
    10 mm

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha PVC Inner Corner Tile Beading and Arpitha External Round Edge Tile Beading

    Providing and fixing of Arpitha PVC Inner Corner Tile Beading and Arpitha External Round edge Tile Beading of nominal thickness 1.2 mm of suitable Colours & depths (6.5, 9.5, 10.5 ,11.5 & 12.5 mm), made out of PVCU and PVC co-extrusion as protector for tiles inner corners and external edges, for all vertical and Horizontal corners and edges as per specification from M/s. Arpitha Exports, Bangalore . Rate shall include for preparation of surface, cleaning, curing etc. complete, all as directed by the architect / engineers.

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha PVC Groove Tile Beading

    Providing and fixing of Arpitha PVC Groove Tile Beading of nominal thickness 1.2 mm of suitable Groove opening made out of PVCU and PVC co-extrusion to have uniform groove over tiles , marble or granite , for all Horizontal skirting top edges as per specification from M/s. Arpitha Exports, Bangalore. Rate shall include for preparation of surface, cleaning, curing etc. complete, all as directed by the architect / engineers.

    Unit :: RMT

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Arpitha Rubber Corner Bead

    Providing of Arpitha Rubber corner bead to protect parking area columns made out of rubber of size 100 mm x 100 mm size, with curved corner at the center, length 1 m(1000 mm) and thickness 20 MM including tying in position with suitable nails / screws etc., complete and as per manufacturer specification, from M/s. ARPITHA EXPORTS, Bangalore, as directed by the architect / Engineers.

    Unit :: RMT

    Rate quoted for supply only. Fixing to be done by the contractor

  • Plaster Mesh

    Stainless Steel External Corner Protector

    Supplying and fixing of Stainless Steel External Corner Protector for tiled wall columns as per specification from M/s. Arpitha Exports - For Marble/ Granite. Rate shall include for preparation of surface, cleaning, curing etc. complete, all as directed by the architect / Engineers.

    Available for 10 MM Thick Tiles in sizes
    25 mm x 25 mm
    40 mm x 40 mm
    Availablen for 20 MM Thick Tiles in sizes
    25 mm x 25 mm
    40 mm x 40 mm
    Unit :: RMT

    Rate quoted for supply only. Fixing to be done by the contractor